rc track bar question
#1
Junior Member
Thread Starter
Join Date: Oct 2011
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
rc track bar question
so i installed a rc track bar 4 weeks ago only wheeled 2 times ,after the last trip i got the death wobble so the next day i had my buddy look under the jeep when i turned the steering wheel back in forth and noticed the track bar moved a bit and that the ball joint had play and would move up and down ,do u guys think the ball joint was bad from factory of just wore out in 4 weeks ,im going to complain.
by the way im lifted 4 inchs on 33
by the way im lifted 4 inchs on 33
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
complain see if you can replace it with a double sheer and drop bracket much better set up get rid of the tie rod set up.
#3
CF Veteran
I had the same issue with my RC adj track bar. Mine went out after about 1500 miles. Their tie rod ends are pieces of ****. I got a new one on warranty and that failed in less than a week. Tried to contact them for another replacement multiple times and finally got the order placed but never received the part... gave up after that. I suggest buying a quality Moog or other TRE, should eliminate the problem.
Last edited by Dan91; 03-21-2012 at 01:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 08:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)