i just have a question if the shocks from a 2007 rubicon are long enough to go with my ~3 inches of lift on my 2000 cherokee... i remember reading someware that they were perfect for 3 inches of lift on a cherokee i only ask because i can score a set of new ones for 100 rather then 200 for new skyjackers

 

they should work with bpes. i have on jk shock numbers on mine. i have 5inches of lift

 

so with bpe's there long enough for 5 inches so w/out the should be fine for three inches cause i just checked the difference in extended lenghts and the rear is like 4+ inches bigger and the front is around 3 inches longer

 

They work fine you need to take the bar pins out of your shocks and install them in the jk shocks because they do not have them. If your in the 5" range then just buy a set of BPE. With BPE they will be to long at 3".

 

just make bpes out of your rear sway bar

 

sorry i just posted a new thread this one got away on me i can make bpe's outta my sway bar???go on

 

you would be suprised at all the stuff you dont have to buy and can make yourself

bpes

http://www.lunghd.com/Tech_Articles/.../Rear_BPEs.htm