Quick Question, 89 Pioneer Ujoints
03-23-2010, 02:50 PM
#1
CF Veteran
Thread Starter
Quick Question, 89 Pioneer Ujoints
Just wondering if these will be the right ones, before I buy them.
I need them for the Front axle, drivers and passenger side.
89 Pioneer d30, NON ABS, 4.0l
Pretty sure they are, but figured I would ask.
http://www.autozone.com/autozone/cat...&parentId=12-0
I need them for the Front axle, drivers and passenger side.
89 Pioneer d30, NON ABS, 4.0l
Pretty sure they are, but figured I would ask.
http://www.autozone.com/autozone/cat...&parentId=12-0
03-23-2010, 03:03 PM
#3
CF Veteran
Thread Starter
Part Number: 1-0174DG
Weight: 1.0 lbs
Warranty: Limited Lifetime
Application: Wheel joints
Without anti-lock brakes
Notes: Fits All Locations
Journal Cross: Solid-forged and Dura-coated
Bearing Cup Finish: Anti-corrosive coating applied
Snap Ring Finish: Anti-corrosive coating applied
Nitrile Rubber Seal: Yes Seal Color: Yellow Maintenance-Free Type: Yes Includes: Snap ring, 4 pcs/set
Quantity: Sold individually
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
Features & Benefits:
Never needs greasing- factory-filled with synthetic lithium grease. Solid-forged cross body to increase joint strength for rigorous loads. Precision ground needle bearings for higher load carrying capacity. Nitrile rubber seal engineered to reduce seal surface friction. AlumiShield applied to bearing caps and hardware to prevent damage to aluminum driveshafts
Weight: 1.0 lbs
Warranty: Limited Lifetime
Application: Wheel joints
Without anti-lock brakes
Notes: Fits All Locations
Journal Cross: Solid-forged and Dura-coated
Bearing Cup Finish: Anti-corrosive coating applied
Snap Ring Finish: Anti-corrosive coating applied
Nitrile Rubber Seal: Yes Seal Color: Yellow Maintenance-Free Type: Yes Includes: Snap ring, 4 pcs/set
Quantity: Sold individually
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
Features & Benefits:
Never needs greasing- factory-filled with synthetic lithium grease. Solid-forged cross body to increase joint strength for rigorous loads. Precision ground needle bearings for higher load carrying capacity. Nitrile rubber seal engineered to reduce seal surface friction. AlumiShield applied to bearing caps and hardware to prevent damage to aluminum driveshafts
03-23-2010, 04:15 PM
#4
CF Veteran
don't know if those are the correct joints you've linked to, but you want spicer 5-297x or spicer 5-760 u-joints. most cross reference numbers still use the 297 and/or 760 part number.
spicer 5-760 just replaces the old spicer 5-297 as they are essentially the same joint, just stronger casting.
spicer 5-760 just replaces the old spicer 5-297 as they are essentially the same joint, just stronger casting.
life time warranty i think...
Thread
Thread Starter
Forum
Replies
Last Post
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)