Quick Noob question
#1
Seasoned Member
Thread Starter
Join Date: Jan 2010
Location: Omaha, Nebraska
Posts: 398
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: Inline 6 4.0 liter
Quick Noob question
My rear passenger running light is out. Not my brake light. Just the red light that is on when your headlights are on. I tried a new bulb, and it is only the passenger side. I dont think there is a fuse for ONLY that light. Any suggestions?
#2
CF Veteran
Join Date: Apr 2008
Location: Smiths Station, Al
Posts: 7,661
Likes: 0
Received 13 Likes
on
10 Posts
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Light tester. You can pick one up for cheap.
Then after that multimeter. You can check continuity to see if you are grounding out or if you even have ground there.
Most Jeep electrical problems come from poor grounding. It has been advised many times on this forum that if you have to fix something to slap another ground to the electrical component in the process.
Then after that multimeter. You can check continuity to see if you are grounding out or if you even have ground there.
Most Jeep electrical problems come from poor grounding. It has been advised many times on this forum that if you have to fix something to slap another ground to the electrical component in the process.
#3
CF Veteran
Join Date: Feb 2009
Location: birmingham,england.
Posts: 1,983
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 ltr
x2 remove the boot linning [trunk] on the appropriate side and have a mess with the wiring, and as said add an extra earth if possible
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)