a quick flexplate question
#1
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
a quick flexplate question
So I scored a flexplate at pullapart today and I was wondering if
there was a certain configuration as to how it bolts up (I'm going from
2wd manual to 4wd auto). I imagine that the sensor picks up the
square holes on the side of the plate/
thanks
there was a certain configuration as to how it bolts up (I'm going from
2wd manual to 4wd auto). I imagine that the sensor picks up the
square holes on the side of the plate/
thanks
#2
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
Yes, only bolts on one way.. rotate till all the bolts line up. The circular strap faces the transmission.
Make sure you match Renix, OBDI and OBD components..
Make sure you match Renix, OBDI and OBD components..
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)