Question on Pulling The Engine
#1
Member
Thread Starter
Join Date: Jul 2012
Location: The corner of Grey St.
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Question on Pulling The Engine
Hi guys, I am probably going to pull my engine this weekend in to start a rebuild. I have an engine hoist and leveler. I was wondering where you guys attach the leveler to the engine when you are lifting it out.
Thanks,
Taylor
Thanks,
Taylor
#3
Member
Join Date: Jul 2012
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95, 00
Model: Cherokee
Engine: Both 4.0L
Well, I used the top left front hole that the AC compressor bracket was mounted to and the back right exhaust/intake bolt hole. Worked fine for me taking the engine sans tranny out and putting back in. But I did not have access to a leveler, just a chain and hoist.
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-29-2015 09:31 PM
Compungo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-28-2015 09:35 PM
DanO55
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-28-2015 07:16 PM
Rad Vlad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-20-2015 07:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)