Question about doors
Thread Starter
Newbie
Joined: Jun 2011
Posts: 21
Likes: 0
From: Stafford, VA
Year: 1996
Model: Cherokee
Engine: 4.0 I6
So after removing the interior on the passenger door, i found that there is a plastic sheet that covers everything behind that, and is somewhat glued around the edges of the door, basically sort of molded to the form of the door, with the proper holes where the screws go in. Question is, does that plastic need to be kept or can i swap that out with dynamat or just leave it off? Also, what is the best way to take of the interior covering on the hatch, to gain access to the speakers?
CF Veteran
Joined: Jun 2011
Posts: 2,460
Likes: 0
From: Dayton, Ohio
Year: 1992
Model: Comanche
Engine: 4.0
Ive pulled mine off like literally 6 times in the past 3 weeks to fix a door lock that wont stop breaking..Ive pulled that off and put it back on ever time..still sticks and ive had no problems with it. just pull it off, itll stick back up
CF Veteran
Joined: Sep 2010
Posts: 12,692
Likes: 6
From: Mercer County, NJ
Year: 2001
Model: Cherokee
Engine: 4.0L I6 HO
Originally Posted by bbeard
So after removing the interior on the passenger door, i found that there is a plastic sheet that covers everything behind that, and is somewhat glued around the edges of the door, basically sort of molded to the form of the door, with the proper holes where the screws go in. Question is, does that plastic need to be kept or can i swap that out with dynamat or just leave it off? Also, what is the best way to take of the interior covering on the hatch, to gain access to the speakers?
Thread
Thread Starter
Forum
Replies
Last Post
John T
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Feb 19, 2022 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



