power window track removal
09-11-2009, 11:34 AM
#1
I like it in the dirt
Thread Starter
Join Date: Jul 2009
Location: Alberta Canada
Posts: 1,802
Likes: 0
Received 1 Like
on
1 Post
Year: 2003
Model: Grand Cherokee
Engine: 4.0
power window track removal
i need to remove the track for my window so that i can replace the regulator and motor, got one from the jy but when i took that one out i drilled out the rivets that ataches the motor to the track and in order to get to it i had to bend the stuff out of it. so how can i get mine off as i dont want to damage my stuff?
09-22-2009, 01:37 PM
#3
I like it in the dirt
Thread Starter
Join Date: Jul 2009
Location: Alberta Canada
Posts: 1,802
Likes: 0
Received 1 Like
on
1 Post
Year: 2003
Model: Grand Cherokee
Engine: 4.0
ok so lets change this up a bit. i drilled out my rivets and now i need to know do i drill out the rivets that hold the worm gear to the motor? and how can i access that part withiout bending my wormgear caseing?
09-22-2009, 02:16 PM
#4
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
It has been awhile sence I did mine,but it seems all i did was drill out the rivets and replace the motor,the regulator should just pull out of the motor.
Last edited by Abovetimberline; 09-22-2009 at 02:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Bucko
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
11-04-2018 09:52 PM
beabout
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
07-06-2018 11:10 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)