Hey everyone so a i bought my jeep around 6 months ago and when i bought it on the driver side controls worked but the window controls on all the other doors did not so i did the bypass and in worked...i wanted to make it more permanant so i cut the tan and yellow wires going to the white connector where the kick panel is and i soldered the tan and yellow wire coming out of the connector and soldered them to just the tan wire that goes up into the door panel...i never solderd the yellow wire going up to the door panel because it worked with just the one wire...this was working for a while but then just my driver window would sometimes stop working and it wouild get stuck down for no more than 15 mins but today it has been stuck down all day..ive been trying everything...only thing i notice is that i use the switch for the windows on nthe driver controls the lights on them seem to dim a little but when i hit the driver window they dont dim...any ideas ill post a picture in a minute

 

1

 

Broken wires in the door boot.

 

hmm i guess ill take the boot off tomorrow i did mess around with it moving the wires in it around to see and nothing happened