my 99 limited has a power drivers seat...it just stopped working
i thought it was a fuse..so i look in the manual to see what one it was...nothing says power seats
does anybody know what fuse number it is?
also...i window lock didnt work right, so i did the jumper wire mod..would this have anything to do with the power seats?
i thought it was a fuse..so i look in the manual to see what one it was...nothing says power seats
does anybody know what fuse number it is?
also...i window lock didnt work right, so i did the jumper wire mod..would this have anything to do with the power seats?
CF Veteran
The power seats are powered through a 25 Amp Circuit Breaker, not a fuse.
It's CB #29 in the Junction Block (Passenger foot well). You'll have to comletely remove the JB cover to get at it. Once the cover is off, you'll see three larger relays, look straight up from the top relay. There's two small CB's there. CB 29 is the one on your right (as you look at the CB's, and straight up from the top relay).
You can't tell if a CB has popped like you can with a fuse, you have to just change it.
It's CB #29 in the Junction Block (Passenger foot well). You'll have to comletely remove the JB cover to get at it. Once the cover is off, you'll see three larger relays, look straight up from the top relay. There's two small CB's there. CB 29 is the one on your right (as you look at the CB's, and straight up from the top relay).
You can't tell if a CB has popped like you can with a fuse, you have to just change it.
Member
Does your passenger side power seat work? If it doesn't, check the CB as posted above with a multimeter. If it does, your issue lies elsewhere and I would start checking the motor underneath the seat.
Quote:
passenger side is a manual seat, the drivers seat is the only oneOriginally Posted by crimsondragon
Does your passenger side power seat work? If it doesn't, check the CB as posted above with a multimeter. If it does, your issue lies elsewhere and I would start checking the motor underneath the seat.
i will look into it...#29 i think i read on a earlier post...i dont think its the motor..it worked fine one day, next day nothing...i would assume it would get weaker over time
luckily if its the motor...its stuck where i need it.....