94Sportxj

The electrical fire happen while driving and i dont know what to do about it.. should i go to the u-pull it and get all new wires or is my jeep screwed?

93xj

well first u need to find out what has burnt or if u can put some pics up on here and im sure we can somewhat tell u what u will need but there are allways surprises.. lol if it was me that would be all the excuse i would need to dump a carb'd 350 in it with msd lol

1995XJ_Sport

haha speaking of Cherokee's with V8's.... I saw this earlier and I WANT ONE!!!!!!!

94Sportxj

ok Ill go take a picture right now and post it up in a few.

94Sportxj

is this a good enough picture?

93xj

well man ouch.. looks like u need a new map sensor, some vacume hose, and the wiring harness u can do one of a few ways, u can cut the wires on each side of where they are burnt and take the time to run new wires between u can buy a whole new harness wich would take a long time to install... and are any of ur injectors damaged i cant tell because that would be expensive as hell

OverlandZJ

Looks like that originated as a fuel fire from a leaking o-ring on an injector, traveled up and back.

Had that happened at the front of the motor you could have burned the hood release cable and would have lost the rig.

Thats why we tell people not to drive a rig if you smell fuel. Did you smell fuel?

93xj

u have no idea how easy it is ... could do it with a couple cases of beer in a weekend

94Sportxj

im pretty sure none of them were just the wires. how much do you think it would cost?

1995XJ_Sport

sorry for the hijack..

I can get a 350 block with some of the parts for free from a buddy, I dont know what parts it still needs, but he told me I could have it as long as I use it.

93xj

well if its just what i listed u will need wire, heat shrink connectors, vacume hose, a sensor, u and a friend could do the wiring in a day with 50 or so dollars

94Sportxj

OK! thanks.