pintle cap question for those that have done injector swaps.
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Lake County, IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
pintle cap question for those that have done injector swaps.
I would like to know if the pintle cap off a 4.0 cherokee injector is the same as the ones on the Neon upgraded injectors.
At my local napa they brought me out the injector o-ring kit for the neon 2.0. The kit consisted of 2 orings a bushing and a pintle cap that neither looked the same or even fit the injector.
Thank you, Andy
At my local napa they brought me out the injector o-ring kit for the neon 2.0. The kit consisted of 2 orings a bushing and a pintle cap that neither looked the same or even fit the injector.
Thank you, Andy
#2
CF Veteran
Join Date: Nov 2009
Location: Conroe, Texas
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
i just put the neon injectors in my jeep a week ago. (great upgrade) i went to the auto parts and they wanted 3.50 for 2 o-rings and the pintle cap, so i just bought one box of it and re-used the o-rings that were on the injectors already in my jeep. i didn't even use the pintle cap, you dont need to. its worthless, i dont even know why its there. i bought mine used from a guy on here and just put them in, i should've have even bought that box of 2 o-rings.
#3
CF Veteran
Join Date: Nov 2009
Location: Conroe, Texas
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
just take your injectors out, use the old o-rings (they should look fine, mine looked brand new and the jeep has 160,000 miles). or if your neons came with o-rings use them, it took me an hour to do the swap, it is very easy if you are mechanically inclined. im pretty sure it is the 2.4 liter neon though, i can get you the part number. let me find it
#5
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Lake County, IL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I have the correct injectors. I just wanted to mak sure the pintle caps off the xj were the same. After doing some reading i would not run my injectors without the pintle caps. Engine fires on the 5.0 mustang boards clued me into this.
#7
Seasoned Member
Join Date: May 2009
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I bought some neon injectors and one of them didn't come with a pintle cap. I went to the parts store but the pintle caps that were in the rebuild kit didn't fit. What should I do?
Thread
Thread Starter
Forum
Replies
Last Post
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
67
09-18-2015 08:26 AM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)