I have an odd request I hope you guys can help me out on. I have an '87 Comanche that I swapped to an Auto from a '90. The problem I have is I am missing a jumper wire between these two connectors. These three wires are for the cruise brake switch, and the power/comfort switch. I have made a jumper for the meantime but I would like the real connector that is supposed to go here.

Can you guys with 4.0L auto take a picture and post it of what is supposed to connect these two connectors? I am missing something so I made a jumper temp to make them work. Mine is from '87-90.

Here's the pics.



















They are under the dash, one comes from the harness on the ECU and the other comes from the harness that goes up to the left of the steering column.

Thanks so much.