Paying too much?
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 57
Likes: 0
From: Vancouver Island, Canada
Year: 1993 4Dr Country
Model: Cherokee
Engine: 190hp 4.0 242 H.O I6
I took my Cherokee in to get my upper and lower right ball joints and u-joints done at a place called tims auto and was told it would cost $880...
How does that sound for cost.. Just trying to get an idea because I brought it to kal-tire and was quoted $980 for upper and lower ball joints, u-joints, upper and lower control arm bushings which I don't need because I have new control arms, and a front end alignment...
how does this sound?
How does that sound for cost.. Just trying to get an idea because I brought it to kal-tire and was quoted $980 for upper and lower ball joints, u-joints, upper and lower control arm bushings which I don't need because I have new control arms, and a front end alignment...
how does this sound?
CF Veteran
Joined: Jul 2009
Posts: 1,254
Likes: 11
From: London Ontario Canada
Year: 2000
Model: Cherokee
Engine: 4.0
I took my Cherokee in to get my upper and lower right ball joints and u-joints done at a place called tims auto and was told it would cost $880...
How does that sound for cost.. Just trying to get an idea because I brought it to kal-tire and was quoted $980 for upper and lower ball joints, u-joints, upper and lower control arm bushings which I don't need because I have new control arms, and a front end alignment...
how does this sound?
How does that sound for cost.. Just trying to get an idea because I brought it to kal-tire and was quoted $980 for upper and lower ball joints, u-joints, upper and lower control arm bushings which I don't need because I have new control arms, and a front end alignment...
how does this sound?
Seems like a lot to me. Say a shop rate of $60 an hour it shouldn't take more than 3 hours tops ($180)and parts should be about $200...........
Yeah your getting hosed
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 57
Likes: 0
From: Vancouver Island, Canada
Year: 1993 4Dr Country
Model: Cherokee
Engine: 190hp 4.0 242 H.O I6
I may be getting hosed but nowhere will do a front end alignment without new ball joints and u-joints and my mudders are worth too much to wear down 
I think I will get overcharged no matter where I go... sadly
Last place I was at charges $100 an hour

I think I will get overcharged no matter where I go... sadly
Last place I was at charges $100 an hour
Old Skewl CF like a Sir
Joined: Feb 2008
Posts: 4,355
Likes: 3
From: Fort Myers, FL
Year: 1996
Model: Cherokee
Engine: 4.0L High Output OBDII
Idk, I can look it up tomorrow at work if you'd like?
Sidenote - where ever you have the alignment done, see if they offer a "Lifetime Alignment". A few shops I've been at in the past offer that, basically 3 years worth of free alignments that you pay for up front, it was like $400. But... you could beat the life outta the truck every single weekend offroad, then have it aligned as many times as you wanted.
CF Veteran
Joined: Jan 2009
Posts: 1,964
Likes: 6
From: Baltimore, Maryland
Year: 1994 1993
Model: Cherokee
Engine: 4.0
That sounds near "dealer" labor cost. Most local repair shops here average about $60-$65 an hour. By the way...Since the original poster is from Canada is the $880 quoted in US or Canadian money?
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 57
Likes: 0
From: Vancouver Island, Canada
Year: 1993 4Dr Country
Model: Cherokee
Engine: 190hp 4.0 242 H.O I6
The $880 is Canadian currency and no im not driving it to the states to get it fixed anyway
so $880 here is $880.
Why is it you ask though?
so $880 here is $880.Why is it you ask though?
Trending Topics
CF Veteran
Joined: Jan 2009
Posts: 1,964
Likes: 6
From: Baltimore, Maryland
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
stimp774
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
28
Oct 1, 2015 09:00 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



