parking lights dont work after rewelding the drivers door hinge
#1
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
parking lights dont work after rewelding the drivers door hinge
everthing works on my jeep except the front parking lights after i rewelded the dreaded top drivers door hinge..fond wires in the door inside the front fender...they are yellow and black...are these wires that control the parking lights and did i fry em or is something else the matter?
any help would be appricated!!
any help would be appricated!!
#5
Senior Member
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
both sides arent working?
the driver side wiring for the parking/turn lamps are blue and grey w/black grounds.
passenger side is blue and brown w/black grounds.
i would check the fuses once more and the headlight switch(ground and harness). could of fried one of those wires somehow.
good luck.
the driver side wiring for the parking/turn lamps are blue and grey w/black grounds.
passenger side is blue and brown w/black grounds.
i would check the fuses once more and the headlight switch(ground and harness). could of fried one of those wires somehow.
good luck.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
no this is just my winter beater but a nice one at that...came from hawaii ...have a 05 cobalt ss thats all modded and put up for the winter...just need help and now it works
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
mboudreau001
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-26-2015 04:37 AM
csmith237
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-24-2015 12:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)