I don't see one in this kit. I need one cause when I pulled them apart to install a new wheel cylinder a small piece broke off. If it wouldn't come in this kit...where would i get one?

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Drum-Brake-Hardware-Combi-Kit-USA-Brake_5313856-P_354_R|GRPBRHWAMS_1225858178___

 

are you talking about the adjust cable?


or the spring that is around the end of the e-brake cable, cause those aren't available separate, as far as i know. you'll have to replace both e-brake cables.

 

this is what you need there is left and right sides http://shop.advanceautoparts.com/web...AMS_1225846745___

 

It's the spring that's on the right hand side of the bar that's right below the wheel cylinder. I talked to a guy at Advance and he can't get me one but told me that everyone leaves that spring off anyways.

 

ok your talking about the spring that goes on the parking brake strut i wouldnt leave that off other wise the strut ratels around also if you use your parking brake it needs to be there and its in the hardware kit like this one http://shop.advanceautoparts.com/web...AMS_1225845419___ they are on the right and are blue

 

That hardware kit is for 10" brakes and I have 9" though. The kit I got doesn't have those springs.

 

just checked on napa's site and there kit has all the springs and theres has more to it than the advance auto one here is the part number for napa UP 2297

 

Thanks...Looks like I'll be returning my kit to Advance and get the one from Napa

 

no problem but when you get the one from napa check to make sure its all there i allways do just so i dont get shorted