Bottle. Chuck cap that comes with it. Use 703-1396 cap.

 

Pulled the plugs since when I took her out of my drive way and onto the street she was missing. The plugs look fine. 456 look like they've been running a bit more lean then the others. Still misses. I'm suspecting blown head gasket between cylinders.

 

Or loose intake manifold bolts..........

 

Bolts were re tightened a few weeks ago.

 

Took her for a drive and she seems to run fine. Acts like she's running out if gas around corners but other wise the miss is gone and she's running strong. Not blowing water out the cracked bottle and getting up to normal operating temp.

 

Fuel pump taking a dump? Fuel pump suction line split?

 

Id replace it should be free when cold stiff when hot and get pressure bottle issue resolved ive been thru three. Finally just upgraded been 5 years now still good.

 

Fuel pump is new, only 3 months old. Now after putting 40 miles on it after over heating its running like normal. Still has just water in the system so I'm gonna drain half and fill with antifreeze and order a new pressure bottle

 

Ditch the cap that comes with the bottle and get a 703-1396 from Napa instead.

 

Thanks cruiser, I will also get another 703 cap.

 

Well, if you've already got one, reuse it.

 

It wouldn't be bad to have a spare. I've lost two caps from forgetting them on the battery then tanking off.

 

OK then, get a new one. LOL. Kids these days..........

 

I have ordered a bottle. I will pick up the cap at the same time. Your never to old to act like a kid.

 

Ask my wife. I'm always irritating her with my juvenile behavior. I just turned 59 last week. I agree. People ask me where I grew up and I tell them I haven't yet!!