One problem leads to another...
#1
Member
Thread Starter
Join Date: Feb 2009
Location: Southwestern Indiana
Posts: 219
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
One problem leads to another...
Well, I've been having issues is the recent snow of my transfer case not shifting out of 4HI. To get it to shift, I have to stop or slow my XJ to about 10 mph then stomp on the gas. It works to get the transfer case to shift, but it appears I've now torn the motor mount isolator from the housing. I can see the rubber shifted to the rear on both sides. I can also hear a popping sound in the rear as if the pinion is being moved also can feel a dull thud under my seat as if the transfer case is torquing the crossmember. That all sounds like a motor mount right?
I am a little undecided on the poly busings. Are the vibrations really that bad? I wonder because I see Rustys only offers the rubber isolator mount now instead of the poly.
Opinions?
Also how do you go about getting the forum discount from ironman offroad? Are these the best mounts?
I am a little undecided on the poly busings. Are the vibrations really that bad? I wonder because I see Rustys only offers the rubber isolator mount now instead of the poly.
Opinions?
Also how do you go about getting the forum discount from ironman offroad? Are these the best mounts?
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
Mitchfrenchxj89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
19
07-31-2016 08:54 PM
DaFisch
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 02:38 AM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)