a1bertmarkovski

So i took my 99 jeep cherokee to get inspected and the mechanic said he cant do it because his plug cant communicate with the jeep!... i dont know what to do or where to start. a few days before i left lights on and it killed the battery to the point where i jump it and it wont hold idle. So I took it right over to advance auto to see if their code reader could communicate and it said that it had a pending code (o2 sensor)and all drive cycles were not complete. Is that why it cant communicate? It did not fail it could ot communicate. Help!!

CPLSeraphim

Go back to advanced and see if they can still read off of it. If they can with their dinky machine, the inspector guy can.

If advanced cant read off of it, tell them they read it the other day, and ask them while they are out there what could be the issue. could just be a loose wire going to it.

stockli

? autozone would have used the same plug as the inspector.

They use the same port. Your OBD2 diagnostics port.

a1bertmarkovski

Yeah i tool it to advance right after the guy said it wont communicate. They said pending codeand dri e cycles not all completed.

a1bertmarkovski

*took it to advanced

CPLSeraphim

Hmm... I am curious about this. I work tonight, but i will take a look at my jeep tomorrow to And it is slightly BS that they can't inspect your jeep because they can't read codes. Remember how they didn't need computers to do their jobs for them (granted, the cars were much easier back then, so not knocking them.)

mocrawlin

most obd2 ports are powered off the cigarette curcuit. if that fuse is blown the reader wont connect/communicate with vehicle. i was a parts counterman for 8 years, and dealt with that alot. worth a shot i guess, but doesnt explain why he couldnt check it and advanced did right after tho if i read that right above.

Bigwillie

i have a obdII that i got from amzon.com and it works great on my jeep. connects thru bluetooth to my acer tablet.