NP242 Rear Output Bushing
Thread Starter
Member
Joined: Dec 2012
Posts: 203
Likes: 10
From: Vancouver, BC
Year: 1993
Model: Cherokee
Engine: 4.0 HO
NP242 Rear Output Bushing
I can grab a hold of the rear driveshaft at the transfer case and wiggle it up and down. After a bit of research I found this is due to a worn output bushing in the rear extension housing of the TC.
Does anyone have any tips on the replacement of this bushing? I read somewhere that it's better to replace the entire extension housing which already has the bushing installed.
Links to parts involved:
http://www.quadratec.com/products/52201+01.htm
http://www.quadratec.com/products/52240_00.htm
Does anyone have any tips on the replacement of this bushing? I read somewhere that it's better to replace the entire extension housing which already has the bushing installed.
Links to parts involved:
http://www.quadratec.com/products/52201+01.htm
http://www.quadratec.com/products/52240_00.htm
Thread
Thread Starter
Forum
Replies
Last Post
cr1d3r
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 29, 2020 12:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
