Hello, I have 1999 Cherokee with a 4.0. I did a water pump, thermostat, and belt last week, started it bled the system. Than I rinsed off the engine, All is going well, than the jeep stalled 10 minutes later.

I changed the cps, cleaned every wire connection under the hood, and checked the distributor cap. Still no Start.

I do have spark at the coil but not at the distributor.

Please any help will be great, thank you.

 

Cam position sensor under the rotor?

 

when you sprayed it did you cover the dist?

 

I did not cover the distributor when I sprayed it. And is there a way to test the cam sensor?

 

Any help would be great

 

Happy 4th to all Cherokee forum peoples.

I still cant get my jeep running,

I changed the crank sensor, cam sensor, cleaned every connection, checked all the fuses and relays, changed the cap and rotor.

 

Sorry most like me are out of town for the holiday. But I want you to do me a favor disconnect your negative battery terminal and ground It on your frame for a hour once that is done cycle your key 3 times on off on off on once it is on you cell should flag let me know the number of flashes they will be seperated by a pause. Now it is getting fuel and cranking right just not spark right?

 

If that doesn't work get some pb blaster and take off rotor and dust cap and can sensor spray a little in there let us know maybe someone else will chime in to with similar issues now the auto shutdown and fuel pump relay you did check right?

 

Auto correct on my phone changes words hope u can understand

 

Change the coil? Even with a junk yard one. How did you check the relays? Fuses are easy since you can see if they are blown or not. Get a 100 MPH leaf blower and blast everything in case any water is in something causing a short. As mentioned reset the computer. But if you are getting fuel and spark as far as the coil I'm leaning towards that being bad.

 

Hello, I just grounded the cable, i will let you know in one hour. I am getting spark from the coil, it cranks strong and the fuel pump is working fine. i checked all the fuses and relays.

 

So what's the verdict

 

Hello, I have tried the key trick 4 times and it does nothing. I don't know if undoing it wrong or what.

 

Wont work on 99.

 

OK thank you, I did check it with a scanner, but I have no codes.