Thanks

 

Autozone had the CPs for $29 I think it was.
Quite a difference in price between Autozone and O'Reillys.

 

70 dollars autozone got in now need to put it in!

 

Did it fix it?

 

idk currently raining out hopefully ill find out tommarow

 

Could be the engine control module (or engine control computer...same thing). If its not the cp try that. I'd start small though and work your way up. Check all fuses, electrical wiring, etc...

 

If replacing the CPS does not fix it, check the ground at the coil plug with a test light, it should flash while cranking. If not, then you have a cam sensor problem.

 

It did not fix it... ill check that next thanks!

 

someone siad it could be the oxygen sensor could that be?

 

by the coil plug you mean where it goes to the cap

 

also there is no pressure at the fuel rail now... plus the no spark with crank sensor changed ...

 

A bad O2 won't keep the engine from starting. Have you checked the fuses under the hood?

 

yes i have gotta check the relays though

 

now the engine controll 1 fuse seems to be blown . so i used a test light and power to only one side on the fuse box i put a 40a in beacuse 30a would blow as soon as u put it in so i used i 40 just to see and then it would not turn over at all with a 40a that ran power through . but will turn over with blown 30a i have no clue ... broken wire bad ground or conection anyone heard of this?

 

Check your starter, i had same problem about a year ago. parked it when i cam out didnt start fuse was blown change relay then no crank. Changed starter cranked right up. Check the starter for any loose or broken cables.. Good luck

Cancel this comment reread and im mistakin sorry guys.