New tie rods and now the wheel won't center.
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Location: So-Cal
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 244 c.i.
New tie rods and now the wheel won't center.
Replaced all the tie rods and now the steering wheel won't center . The steering wheel is about a 1/4 to the left and is as far as it'll go to the right. The tie rod @ the pitman arm and the drag link are touching in the middle of the adjustment sleeve. The alignment shop got the toe good, but was thrown off about the wheel adjustment. Went to 2 other places and they too were thrown off about the tie rod and drag link cranked all the way. All 3 shops said that everything is perfect except for lack of adjustment for the wheel. All 3 shops said the tie rod at the pitman arm may be too long, but is the same length as the one I took off.
Any ideas??
Maybe a shorter tie rod @ the pitman arm??
Thanks.
Any ideas??
Maybe a shorter tie rod @ the pitman arm??
Thanks.
#5
Junior Member
Thread Starter
Join Date: Sep 2010
Location: So-Cal
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 244 c.i.
I'm sure. The length and holes matched w/ the old one.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)