Need some help with chirping/squeling
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 34
Likes: 0
From: Misawa, Japan
Year: 1995
Model: Cherokee
Engine: 4.0 I6 HO
Hey there so I tightened my belt up and the squealing stopped I have not been able to drive to see if it stopped. It doesn't squeal when just idling and revving the engine. Thanks for all the help
CF Veteran
Joined: May 2010
Posts: 1,187
Likes: 33
From: Boston
Year: 2000
Engine: 4.7L
I hope you didn't over-tighten the belt or else other rotating assemblies may suffer (accelerated bearing/bushing wear). Start considering belt replacement while it's still good. OEM is best but Gates makes a very good quality replacement belt.
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 34
Likes: 0
From: Misawa, Japan
Year: 1995
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by Cherryokee
I hope you didn't over-tighten the belt or else other rotating assemblies may suffer (accelerated bearing/bushing wear). Start considering belt replacement while it's still good. OEM is best but Gates makes a very good quality replacement belt.
Newbie
Joined: Oct 2011
Posts: 1
Likes: 0
Model: Cherokee
Hey guys...I have a 1997 gczj. After changing the water pump and serp belt, chirping started. When I removed the water pump, I removed the power steering pulley as well. Torqued the water pump, but not the power steering pulley when I replaced it. Found some information stating the power steering pulley should be torqued at 20 ft lbs....does this sound right?