Need some exhaust pipe help
#1
Member
Thread Starter
Join Date: May 2010
Location: Virginia
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 6 cyl. 4.0
Need some exhaust pipe help
My exhaust pipe is banging the cross member and I can only raise it up about 1/8 of an inch if that much. Is there something I can get to put in between them to keep it from banging when I start the Jeep? Low budget at the moment.
#3
Member
Thread Starter
Join Date: May 2010
Location: Virginia
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 6 cyl. 4.0
Hanger is still good as far as I can tell. Its just down so low that its ridin the cross member. and when I start it the pipe bounces real bad and sounds like it gettin ready to fly off.
#4
Seasoned Member
Join Date: Dec 2009
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0 H.O. Police Package
Weld the hanger lower on the exhaust so it sits higher? also check the bolts attaching the exhaust to the Manifold.
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
11-06-2015 09:16 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)