well I may have a chance to pull my 91 in the garage before the weekend
I will pull the bolt and post the specs for you

 

I pulled the bolts out of my 91 and 89 and the only difference is the 91 has a little nipple on the end of it. I have one in the garage. Pm your address and I will have it in the mail tommorow.

 

Sweet, thanks bud. I'll gladly pay something.

 

your the man Winston

 

Ok, just because I can't leave well enough alone. I knew that darn bolt looked way to familiar so I had to do some checking. It is the exact same bolt that is used for the front and rear bumper mounts. So go outside and remove one of the 8 bolts holding the rear bumper on and fix your starter in 5 minutes.

 

You have got to be kidding me. So it's the exact same bolt, length and all.

 

Just to check.. The bolts that hold the bracket to the jeep is the bolts you are refering to?

 

Yep, thats the ones.

 

Winston all I can say is you are da man..Worked perfectly and since before xmas the jeep lives.. Now all I gotta do tomorrow is pull it out toss a little thread lock on and torque to 33 ft lb's and she's all set to go. Thanks again bud for all the leg work...