zacmartin12345

I have a 1990 jeep cherokee and redoing all the brake like.Took my new valve and old cut lines to advanced autozone, nothing they had in the store fet.Can someone post what size all the 5 steel brake lines that come out of the valve are and length.

gmullin

you mean you took your old lines to the parts store and they dident know wat size they were. gosh some people shouldent work at a parts store but they are all 3/16 line and if you buy a 50 foot roll you should have enough to do the job. just cut to the leangth you need and flair but be carefull and reause all the old conectors or as meany as possable and make sure that the flair is corect it will be eather a bubble flair or a double flair most flairing kits only make the double flair and if you use a double flair where a bubble flair is sposto be used you will end up with a leek

kojoff

gmullin is right, but it took me a few minutes to read both posts... Know what I mean?

gmullin

how to use a double flair tool to make a bubble flair

zacmartin12345

They knew the size of the line but couldnt match the conectors (mine were all messed up and leaking from earlier attempts of taking them off)on the precut lines.Ill just get new connectors and the 50 foot of line and cut and fit it all myself.Dint know you could do it like that.Thanks guy.