need help
i was hooking my stereo up today. the power and the negative touched together and sparked. after i hooked it all the way up i tryed starting my jeep. and it wouldnt turn over. the blinkers wouldnt work the wipers would work but they were really slow. i tryed jumping my jeep and nothing would happen. can somebody help me figuire out the problem
Senior Member
Joined: May 2010
Posts: 773
Likes: 0
From: Michigan
Year: 1999
Model: Cherokee
Engine: 4.0L I6
i was hooking my stereo up today. the power and the negative touched together and sparked. after i hooked it all the way up i tryed starting my jeep. and it wouldnt turn over. the blinkers wouldnt work the wipers would work but they were really slow. i tryed jumping my jeep and nothing would happen. can somebody help me figuire out the problem
Member
Joined: May 2010
Posts: 167
Likes: 0
From: San Antonio, Texas
Year: 1987
Model: Cherokee
Engine: 4.0L (Renix)
x2, but pull ALL the fuses in your incabin fuse box.
check em all, and for these Jeeps, keep extras anyways...Ive replaced my instrument/taillight fuse 3x in 3 months lol...usually from mudding (getting wet)
just always be sure, check em all. (half of mine are missing cause I live in TX and took stuff out..saves voltage and parts cost!
)
check em all, and for these Jeeps, keep extras anyways...Ive replaced my instrument/taillight fuse 3x in 3 months lol...usually from mudding (getting wet)
just always be sure, check em all. (half of mine are missing cause I live in TX and took stuff out..saves voltage and parts cost!
Trending Topics
Member
Joined: Oct 2010
Posts: 177
Likes: 0
From: Gonzales, Louisiana
Year: 1998
Model: Cherokee
Engine: 4.0
There is no change at all. and even when i try to start my jeep with a screw driver by making the wires touch. it just turns it over but it will need start all the way. my jeep is a 1989 2 door cherokee. im thinking that maybe i fryed my computer. my starter is good my battery is good my alternator is good. ive checked every fuse me and my buddies could find.




