need help
08-14-2015, 08:28 PM
#1
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
need help
Idk much about this site but I need help. I have a 1990 jeep cherokee lerado that won't start. I have spark from my coil to my distributor and spark to my plugs. I'm getting gas no problem. I replaced the pickup in the disributor replaced the ecm and crank sensor and so far nothing has help it just cranks and cranks. Need help ASAP.
08-14-2015, 11:08 PM
#2
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Idk much about this site but I need help. I have a 1990 jeep cherokee lerado that won't start. I have spark from my coil to my distributor and spark to my plugs. I'm getting gas no problem. I replaced the pickup in the disributor replaced the ecm and crank sensor and so far nothing has help it just cranks and cranks. Need help ASAP.
08-15-2015, 05:20 AM
#3
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Getting spark so its not nss. Getting fuel and getting proper fuel pressure two different things.
08-15-2015, 07:46 AM
#4
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I don't have a gage to check pressure but when I have the key on and and press on the check valve on the fuel rail it shoots a stream out 2 or three foot so I feel like it has plety of pressure. 3 week it's been down. I had a small eletrical short in the ****ty wiering that some one had for a eletrical fan. And it burnt the ecm plug so that's the reason I replaced the ecm and plug. So I'm just wondering G if it back fed and got anything else's like computer or what not. I'm not to familiar on the sensors and stuff on the veichle.
