Need 1" more lift
Thread Starter
Member
Joined: Sep 2008
Posts: 114
Likes: 0
From: Hampton, Virginia
Year: 98
Model: Cherokee
Engine: 4.0
Bought a rough country lift (3"0)....and I don't care what the advertisement says......it doesn't even come close to clearing 31" tires.....
Needless to say...I will, and recommend to others to stay away from rough country if at all possible....
Anyhoooooo....I'm lookin for just an extra inch to give me a little flexin room...most of the add-a-leafs and such are around 2".....I have a 2" BB, but don't want to put that back on...it'd be too much.
Does anybody make a 1" AAL and front coil spacer set?????
Thanx in advance......
Scott
Needless to say...I will, and recommend to others to stay away from rough country if at all possible....
Anyhoooooo....I'm lookin for just an extra inch to give me a little flexin room...most of the add-a-leafs and such are around 2".....I have a 2" BB, but don't want to put that back on...it'd be too much.
Does anybody make a 1" AAL and front coil spacer set?????
Thanx in advance......
Scott
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
There is nothing wrong with the Rough Country 3". That's what I started with. Full leaf packs of course. And I ran 31"s with little rubbing.
The Rough Country kits is a very good kit for the starter.
Did you put bigger bump stops in?
The Rough Country kits is a very good kit for the starter.
Did you put bigger bump stops in?
Seasoned Member
Joined: Jun 2009
Posts: 332
Likes: 0
From: Castle Rock, CO
Year: 91
Model: Cherokee
Engine: '96 4.0
what about drop shackles? They add 1.25 so it would match the front!
not sure what BB is so please forgive me.
http://www.rubiconexpress.com/JeepPa...Sh&part=RE2700
not sure what BB is so please forgive me.
http://www.rubiconexpress.com/JeepPa...Sh&part=RE2700
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 10, 2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



