Swap motor has fire,fuel, in timeing just cranks. Any ideal?

 

post have ZERO!! info....swapped in what? briggs and straton? chevy 305? Ford 302? BMW Inline-6?

 

93 XJ 4.0

 

I agree, more information, and something besides near English please

 

Need more info

 

im assuming that you are checking fuel pressure at the schrader valve....next step would be using a noid light on one of the injectors to verify they are geting signal.

 

what motor did you swap the 93 4.0 for?

 

profile says 92 so im guessing he used the 93 ho

 

Yes from a 92 xj 4.0 into a 93 xj that had a 4.0. Even if the fuel injectors was not working right. When i spray starting fluid in it does not even try to run on starting fluid

 

You say it just cranks... You have spark?

 

ok well then how did you check spark?

 

My spark tester from matco

 

And when i was not getting spark my scan tool said it was not getting spark but i checked it with my spark tester and i is geting spark

 

How does the spark tester work? Are you sure it's accurate? Have to tried pulling a plug wire and cranking it to see if it will arc to something? It really sounds like you aren't getting any spark in the cylinders. Also, are you sure you haven't flooded it from too much cranking? We had that issue at first after we swapped my engine.

 

Ok you said you have spark. Whats the fuel pressure? are the injectors getting a signal? were did you put the spark checker? from the coil to distributor? or from distributor to spark plug. did you double check your grounds and wiring harness connections?