S it easy to replace these ? How much are good ones and what's the steps

 

http://lmgtfy.com/?q=Jeep+Cherokee+E...nt+replacement

 

Good ones run around 100 bucks. Stock ones are about 20 for the pair. They're pretty easy to do. Support the engine with a jack and a block of wood underneath the oil pan. Take out the thru bolts of the mount. Then take off the bolts holding the motor mount brackets. Then take em out and for install, repeat steps backwards

And you can find good ones from Ironman 4x4 or Brown Dog, which are both vendors on this forum. Find em on here and get a discount

 

Also remember to position the wood perpendicular ti the oil pan, going across and make sure it's a long enough peice of wood. My piece was a little small and now I have a smallish dent in the pan. No biggie, but it still could've been prevented....

 

I recommend aftermarket motor mounts, stock ones suck and I could make a set last a whole year.

 

stock suck

 

i was running the iron man motor mounts until i sold my jeep