MOPAR Part Number S150 0086
04-28-2019, 07:08 PM
#1
Seasoned Member
Thread Starter
MOPAR Part Number S150 0086
Could some kind soul please confirm the size of the coil spring retainer clip screw on a Dana 30 for 91’ through 93’. The MOPAR part number is S1500086.
According to Mr. Google, several entities report the specs on that part number to be 5/16” - 12 X 7/8”.
This one is driving me insane 🙄
According to Mr. Google, several entities report the specs on that part number to be 5/16” - 12 X 7/8”.
This one is driving me insane 🙄
04-28-2019, 07:27 PM
#3
Seasoned Member
Thread Starter
Thank You!!!!!
Very strange size. Especially given that there is a nut in there.
One of the damn things is broken off on one side in my Dana 30. And i am not the guilty party... for once.
The other oddity here is that there are 10mm bolts in there. But I knew it was wrong because the bolt kept turning out with little resistance.
Very strange size. Especially given that there is a nut in there.
One of the damn things is broken off on one side in my Dana 30. And i am not the guilty party... for once.
The other oddity here is that there are 10mm bolts in there. But I knew it was wrong because the bolt kept turning out with little resistance.
Last edited by Rlmx; 04-28-2019 at 07:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Rikrdolevy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
03-19-2019 10:06 PM
Joshua Winklebottom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-08-2018 07:13 PM
mhubble
Modified XJ Cherokee Tech
0
04-11-2012 01:17 PM
TexasKid747
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
01-03-2010 09:46 AM
mikEdub
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
11-12-2009 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)