Misfire Cylinder 1 - P0301
Thread Starter
Newbie
Joined: Mar 2014
Posts: 9
Likes: 0
From: NJ
Year: 1997
Model: Cherokee
Engine: I6
97 XJ. 2dr. 5Speed. I6. 46K
Its not a dead misfire, I can clear the code and drive 5 to 10 miles before the light comes back on. Engine has NEW cap, rotor, plugs, wires, and head gasket.
- I swapped injector 1 with 2 but light came back on in cylinder 1.
- Checked compression; Cylinder 3,4,5,6 all at 140 but Cylinder 1 and 2 at 110 (a little low but I’m not getting a misfire in Cylinder 2)
- Put oil in cylinder and compression didn't change.
Any thoughts?
Update: Since the car has little miles and hasn't really run in a while i put some top engine cleaner in... the light has not come on after a week roughly 250 miles.
Its not a dead misfire, I can clear the code and drive 5 to 10 miles before the light comes back on. Engine has NEW cap, rotor, plugs, wires, and head gasket.
- I swapped injector 1 with 2 but light came back on in cylinder 1.
- Checked compression; Cylinder 3,4,5,6 all at 140 but Cylinder 1 and 2 at 110 (a little low but I’m not getting a misfire in Cylinder 2)
- Put oil in cylinder and compression didn't change.
Any thoughts?
Update: Since the car has little miles and hasn't really run in a while i put some top engine cleaner in... the light has not come on after a week roughly 250 miles.
Last edited by Treelo; Mar 16, 2014 at 10:16 PM. Reason: Fixed
Sure, since you have a `97, read this recent thread: https://www.cherokeeforum.com/f2/wha...997-xj-189946/
Thread
Thread Starter
Forum
Replies
Last Post
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Oct 8, 2015 08:57 AM
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 3, 2015 07:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




