Master window switch connector
02-11-2018, 10:47 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Calgary, AB
Posts: 40
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
Master window switch connector
On my 2000 XJ, I was trying to figure out why my pass front window would only go down but not up. Replaced the master switch, window regulator assembly, and also repaired the wiring harnesses for both front doors because some wires had broken in the door jamb.
Yesterday I did one final check and found out the if I moved the main harness connector on the master switch up and down the pass window would now moved up and down. I took a look at the clips inside the connector and "massaged" them a bit to try and get a better contact. It worked but when I went to put the door panel back on then it failed again. Move it around and it was intermittent.
Is there anyone who has had this same issue and what did you do the resolve it?
Yesterday I did one final check and found out the if I moved the main harness connector on the master switch up and down the pass window would now moved up and down. I took a look at the clips inside the connector and "massaged" them a bit to try and get a better contact. It worked but when I went to put the door panel back on then it failed again. Move it around and it was intermittent.
Is there anyone who has had this same issue and what did you do the resolve it?
Thread
Thread Starter
Forum
Replies
Last Post
DesertDwella
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
06-13-2018 06:45 AM
OconeeCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
03-20-2011 03:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)