Master Cyl to Proportioning Valve Lines
#1
Newbie
Thread Starter
Join Date: Feb 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0L
Master Cyl to Proportioning Valve Lines
Time to replace my master cylinder on my 87 and I would really like to replace the two hard tubing lines from the master to the proportioning valve. Some idiot mechanic appears to have used channelocks on the connector nuts several years ago when I had the master cylinder changed. Anybody know a good source to find these small tubing lines?
#3
CF Veteran
Join Date: Mar 2008
Location: South Side Chicago
Posts: 2,088
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992, 2- 1998 (All 3, 4 Doors)
Model: Cherokee
Engine: 4.0L in all
I'd see if Quadratec had them in the cat. They might have direct factory replacement.
If not them I'd try Classic Tube or Inline Tubing, I ordered a set of CNC bent factory replacement lines from them for my GMC some time back. Good stuff, rock guards on the lines and everything, straight down to the factory flare fittings.
You can always go the cheap route and custom bend and flare your own lines from the parts store...
If not them I'd try Classic Tube or Inline Tubing, I ordered a set of CNC bent factory replacement lines from them for my GMC some time back. Good stuff, rock guards on the lines and everything, straight down to the factory flare fittings.
You can always go the cheap route and custom bend and flare your own lines from the parts store...
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)