Manual Transmission Fluid
I won't guarantee that it's safe, and I wouldn't take any chances on something as critical as a transmission. But as long as the Syncromesh is safe for yellow metals it should be fine. Redline isn't THAT expensive, considering its meant to last 50,000+ miles on a fill $40 is a very reasonable price. there are a couple Amsoil dealers here on the site who could probably get you a good deal on some gear oil through them.
How many quarts does the ol pukegoat take. im on a bit of a budget after catching crabs... and shrimp last weekend in the gulf and im not wanting to spend anymore than i have too.
Senior Member
Joined: Nov 2009
Posts: 504
Likes: 3
From: Forest Grove, OR
Year: 1989
Model: Cherokee
Engine: Inline 6, 4.ol
Well.... on the bright side... the BA-10/5 uses aluminum in its synchro rings...
But I also wonder if it is done by design.. or if the accountants went on the attack. I had a similar humming in second and third on my BA-10... drained the old NASTY fluid out and refilled it with good fluid and the noise went away. I normally fill through the shifter hole just so I can get a touch more into it.
But I also wonder if it is done by design.. or if the accountants went on the attack. I had a similar humming in second and third on my BA-10... drained the old NASTY fluid out and refilled it with good fluid and the noise went away. I normally fill through the shifter hole just so I can get a touch more into it.
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
Mar 17, 2022 02:15 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Feb 28, 2016 02:05 AM
Girlski
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 15, 2015 03:31 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 9, 2015 04:25 PM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Sep 4, 2015 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



