Whats`s up fellas ....

New to the Cherokee and to this forum. I`m digg`n all the info here !

I recently picked up a clean, one owner `94 from a friend.

I fabbed up a quick 2" spacer and temporary rear shackle (untill I bastard pack) .... sitting on 235 GYW`s

Before I replace the shocks, I was thinking going up one more inch, for a total of 3".

Then, I will fab up a dropped trackbar mount.

What length do the lower TA`s need to be to get the axle pack into spec ? Anyone know hole 2 hole what they should be ?

Does the uppers need attention as well ?

The rear window washer ... stupid question :

Where is the water tank for it, or does it feed off the front tank ? I can hear the pump, but no feed.

Thanks guys !

 

Control Arm Length Application Chart
For Jeep Cherokee (XJ)

Lift...........Lower Control Arms/Upper Control Arms
********Decimal**Fraction**Decimal**Fraction
Stock........15.75.......15 ¾........15.00.......15
2”.............15.92.......16............14.88.... ...15
3”.............16.09.......16............14.92.... ...15
4”.............16.33.......16 3/8......15.03.......15
4.5”..........16.47.......16 ½........15.11.......15
5”.............16.62.......16 5/8......15.21.......15 ¼
6”.............16.97.......17............15.44.... ...15 ½
7”.............17.36.......17 3/8......15.74.......15 ¾
8”.............17.81.......17 ¾........16.09.......16
9”.............18.30.......18 ¼........16.50.......16 ½
10”...........18.82.......18 ¾........16.96.......17

 

Dude, this is awesome....thanks !!!

 

The rear washer feeds from the front tank in that year jeep...Tj