Lost my Cruise
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 51
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0
Was driving down the road and noticed my cruise control didn't work. Light on the dash lit right up but wouldnt work when i hit the set button. Didn't have time to check any fuses, but wouldnt the light not turn on the dash if it was blown? Any suggestions are appreciated
Seasoned Member
Joined: Dec 2009
Posts: 326
Likes: 0
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0 H.O. Police Package
check the vacuum lines. but i'm not sure if its still ran off the vacuum on the newer ones since you said you have a light that tells you when you have it on on my 94 i don't have that light haha i know its on when i can feel the gas pedal not move
Yes, check vacuum canister located on passenger side inside front bumper. Your Neutral Safety Switch (NSS) could also be dirty and be in need of a cleaning.
CF Veteran
Joined: Oct 2009
Posts: 2,867
Likes: 16
From: Fauquier County, Virginia
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
x3, check all vacuum lines. More than likely that is your problem. Old lines = cracked line = oops lol.
Since we're on the subject of Cruise Control, since I've owned mine, I never tried using it. If it doesn't work or has an issue, my XJ isn't gonna explode or rev to 6000rpm or hit 100mph is it?
Since we're on the subject of Cruise Control, since I've owned mine, I never tried using it. If it doesn't work or has an issue, my XJ isn't gonna explode or rev to 6000rpm or hit 100mph is it?
Member
Joined: May 2010
Posts: 155
Likes: 0
From: Orono, Ontario
Year: 97
Model: Cherokee
Engine: 4.0L
im pretty sure that the nss has some effect on the cruise on the 97+. My Nss is not working, and i have no cruise now. It worked before i disconnected my Nss and jumped the connector. Id check if your reverse lights are working.
Trending Topics
Senior Member
Joined: Dec 2009
Posts: 598
Likes: 0
From: Southeast Michigan
Year: 2000
Model: Cherokee
Engine: i-6 4.0
i had a fuse not pop for my overhead lights when i was setting up camp late at night a few weeks ago. wire melted and burned cleaned threw the vacuum line thats right next to the fender and battery. luckily it was only a 6" section that had fittings on both ends, easy junkyard part.
Senior Member
Joined: Mar 2010
Posts: 855
Likes: 1
From: Southern California
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
My cruise has never worked, no lights or anything. Is this common? My buddy has a 1990XJ and his has never worked either, maybe we just need a whole new button assembly? They sell them at PepBoys just haven't tried it yet. There's so many other more important things I work on, never really cared about cruise but it would be nice.
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 51
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0
Thanks for the replies, If I get time later I will check out the vacuum lines. I did see a wire hanging loose inside of my front bumper the other day but I'm not sure what it is. Forgot to mention earlier its a 99. Thanks again for everything.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 27, 2023 03:38 PM
RJSR
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Sep 30, 2015 06:59 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM
jeepgrandltd99
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
Sep 26, 2015 02:06 PM
Cmcilm94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Sep 25, 2015 11:37 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



