Locating under-dash vac line
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 1,487
Likes: 0
From: Parrish
Year: 1989
Model: Comanche
Engine: 4.0
Anyone know exactly where the vac line to open the front vents on the air-conditioning are. I found the floor vent one but cant figure out where the louver and vac line for the dash vents are. I already fixed all of the lines under the hood and have a pretty strong vacuum to the "Jeep Egg" but the air still blows out the defroster. Anyway thanks for everyones help.
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 1,487
Likes: 0
From: Parrish
Year: 1989
Model: Comanche
Engine: 4.0
I found the one leading to the floor louver on the passenger side. I also found three more behind and to the right of the instrument cluster. Is that all? Also which ones behind the cluster go to what vent?
Seasoned Member
Joined: Feb 2010
Posts: 298
Likes: 1
From: so cal
Year: 1990
Model: Cherokee
Engine: 4.0
Looks like you fixed it. But the line you are talking about is on top of the evaporator box, and you have to remove the dash to get to it. I had to replace it and was **** PIST OFF. It is a PITA.
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 1,487
Likes: 0
From: Parrish
Year: 1989
Model: Comanche
Engine: 4.0
Well mine was just a jammed louver under the dash apparently. I am thrilled that its cold and it was just some vac line work and that louver. Just in time for the scorching summertime heat here in FL.
Seasoned Member
Joined: Feb 2010
Posts: 298
Likes: 1
From: so cal
Year: 1990
Model: Cherokee
Engine: 4.0
I need to get my windows tinted.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 8, 2015 04:36 PM
bufbarnaby
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 14, 2015 09:14 AM
RickJames Bish
Modified XJ Cherokee Tech
5
Sep 2, 2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



