lift and shackles?
05-17-2010, 02:46 PM
#1
Seasoned Member
Thread Starter
Join Date: Feb 2010
Location: michigan
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 lt 6cyl
lift and shackles?
well i know that all Cherokees are different but i will be doing a 4.5 inch rc and i was going to add shackles and a coil spacer so i could fit 33 inch tires a little better....so i wanted to know if shackles and a t case drop will fix the drive line angles. i have a 3 inch lift not and i don't have a t case drop and i have no problems at all.....well it is 3 in the front 2 in the back.
05-17-2010, 03:55 PM
#2
CF Veteran
Join Date: Mar 2009
Location: Visalia, Kalifornia, ussa
Posts: 2,750
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
MAYBE, you can try a TC Drop, but plan to get a SYE. Besides the possible vibes, the stock slip yoke and shaft set-up is still Too short for any lift over 3".
05-17-2010, 04:00 PM
#3
Registered Users
Join Date: Dec 2009
Location: Everett, WA
Posts: 1,859
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
05-17-2010, 04:08 PM
#4
Senior Member
Join Date: Aug 2009
Location: Effingham, N.H.
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Its worth doing the SYE, You don't have to worry about your D.S. falling out.
RE hack n tap 99$ then buy a front shaft and your good.
http://www.rubiconexpress.com/JeepPa...YE&part=RE1807
RE hack n tap 99$ then buy a front shaft and your good.
http://www.rubiconexpress.com/JeepPa...YE&part=RE1807
05-17-2010, 06:49 PM
#7
Seasoned Member
Thread Starter
Join Date: Feb 2010
Location: michigan
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 lt 6cyl
yea i was gonna do a hack and tap and a front ds if i needed it......beacuse i will be running 33"s so if the 4.5 inch lift wont give me enough room then um gonna go up 1 more inch
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)