hey yall im finally getting around to putting on my lift this weekend and im wondering i bought the lift used and is there any certain way the springs have to go
exn the rear coil springs on my mustang the ends of the springs on the bottom have to face the inside of the car


thanx for the help guys

 

I have my coils bottom end with the end facing out...but I don think that having them face in or out makes that big of a deal

 

Are you taking the coil springs in front? If so one end of the opening is larger than the other, i.e. one end like tapers in. The "larger" end goes on the axle whereas the other end goes into the body. When you align the bottom of the coil into the coil spring seat on the axle you will see it can only go one way.

edit: just read title yes you are talking coils.

 

yeah smaller side up and the end on the bottom faces out on both just just spin it til it stops if you cant see the notch it sits against

 

sweet thanx for the help guys gettign started tomorrow soon as i get in from work im stoked