Ok So i snapped my leaf spring need a new one Im going to buy it from Quadratec but there are 3 choices Med. 5 1/2 in
Std. 6 1/8 in
Heavy 7 in
Whats the Difference?

 

were did u crack your springs. i cracked mine back by my shackles. is this the page your looking at?http://www.quadratec.com/products/pr...ngs&c=122&pg=1

 

I have a set of 285-75-R16 tire like new and was wondering if that was the same as a 33 0r 32?

And how much lift and what back spacing i need for 1991 cherokee?

The stock jeep isn't getting it!!!!!!!!!!!

Thanks for any replies.

 

med standard or heavy duty is for the weight they can handle. the inches usually indicate the amount of lift they offer

 

would they be like 33-10.50/16?
I'm still learning.

 

right over the axle i car entered my lane and i hit a curb at approximately 50 mph so glad that's the only damage http://www.quadratec.com/products/56010_11.htm that's what im looking at would that raise my back end at all


ps tire guy please start a new thread i don't mean to be an ******* but this one is about leaf springs

 

You might want to consider changing both sets of rear springs so that they'll match..
No point in going down the road leaning to one side.
HTH!

 

it will raise your rear end only if its sagging. http://www.quadratec.com/products/56010_10.htm
I just bought these off a guy from craigslist in a package deal. get both sides and you will need to buy the bushing for them. while your doing this you may want to change your rear shocks. But thats all on you.
http://i713.photobucket.com/albums/w...3/DSCF1390.jpg
this is what my busted leaf looks like

 

are you going to lift the jeep any time soon if so you can get some procomps that have a 2.5 or 3.5 inch lift in the back for about 100 a piece or stocks for about 60 a piece from 4wheelparts.com

 

haha jugbutt was totally hijacking your thread!!! get his posts out of here! I've been wondering the same thing about how to actually find out how much lift a leaf will offer, if it is not already said.

 

Sorry I didn't mean to do that I thought I was starting a new post.
My BAD.