Leaf Clamp Placement
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
Technically, what you have is a bastard pack. Add a leaves are one thick leaf with a lot of arch purchased new. Bastard packs can go either way for ride stiffness depending on what the donor spring is.
Registered Users
Joined: Mar 2009
Posts: 1,401
Likes: 1
From: Pa
Year: 1998
Model: Cherokee
Engine: 4.0
The long leaf I added had Rough Country in white lettering on it, the smaller leaf was extemely thick but was too worn to see if it was also a RC spring. I had to use a 8" C-Clamp to get around all the springs, mine was basically flat the springs with my lift had 5 times the arch my factory's did. I was actually suprised none was broke, I've hauled a lot with this thing, from 6-8square of shingles in the rear (Rubbed like hell, lol) to a F/S Chevy Z71 on a 32ft Dual Axle trailer through the mountains of SW VA
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
1
Dec 22, 2018 09:49 AM
studmuffin
Cherokee Chat
8
Oct 5, 2015 01:54 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Oct 3, 2015 05:46 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 2, 2015 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



