Ran into a little trouble when i blew a tire the other day and ended up bending the lower control arm bracket on the passenger side. Well 2 days ago I hot a bump and it snapped the bracket off the axle tube (not the unibody bracket). Every parts store ive talked to has no clue what im talking about so im assuming u cant buy a bracket there. My question for you guys is does anyone know if you can buy a new lca bracket and weld it onto the axle tube? Or am I screwed and have to get a whole front end? If it matters my cj is a 96 4.0 auto with a 3 inch skyjacker lift and it has the aftermarket lca's. thanks in advance for any help guys

 

You can get new brackets. Rugged Ridge has them. You will need control arm bolts as these are for a TJ but will be fine on there. Done many of these.
http://www.summitracing.com/parts/rgg-1827301

 

http://www.rustysoffroad.com/builder...unts-pair.html

Rustys has them also

 

Awsome thanks alot guys, also just noticed i said cj i meant xj lol