Hi guys, I've read in previous posts you can use the kj injectors in 99+ xj's I was wondering what year kj injectors I can use for a 99 classic?

 

I've never heard of using the KJ injectors. That doesn't mean it won't work though... What I have found is MANY EBAY auctions for replacement performance injectors. They use (I believe) Bosch injectors that provide increased fuel delivery and greatly improved spray pattern. Ive been thinking about getting some for my own Cherokee! I was hoping to get some for Christmas, but ya know how that goes...
I'm going to include a link to just one of the many auctions for these products. Or, just go to Ebay motors and search Cherokee injectors. Many auctions available. One last thing, watch the video at the bottom of the auction page! You can see the difference in the spray patterns!
Good luck to ya!

http://www.ebay.com/itm/BEST-UPGRADE...ht_6126wt_1048

(might have to copy and paste above ^ )

 

Never heard of this either.

I'd guess that you'd need an 00-01 XJ not a 99 due to the coil pack ignition but I could be completely off base.

Hopefully someone else can chime in and give you some info because I'm interested in hearing about this too.

What I do know is that you can use injectors from some mix 90's Chrysler vehicles to achieve the same goals. There's lots of info on here on those injector swaps.

 

Yeah I forget what thread it was but I read on here the 99+ can use the kj injectors and apparently they are so similar you don't even need to re set the computer

 

Found it!!!! It's on the liberty grill to Cherokee thread!

Originally Posted by notop46

Guilty!: https://www.cherokeeforum.com/f11/bet...ectors-109444/

Four hole ev14 injectors from 3.7 Chyrsler. Pre 1998 4.0, swap out connectors or run injector adapters, post 1999 4.0, plug and play.

In case you lose yours in the woods, you can even use the schrader valve cap on the fuel rail. Both are 7/16-14 threads.

I am sure that you could pull the horn and find a way to mount and wire it to a Cherokee.

Wheels? Anyone know the bolt pattern and offset?

 

wow that last snetence in thelast post just threw me way off...say what?

 

5x4.5 and 5.5" BS

 

I copied and pasted it from another thread lol

 

Yeah I figured that out after I answered the question haha

I keep hoping to find a liberty renegade in the JY that I can score rear disks and the roof light bar from.

Want to do something similar to this

 

I want that MJ, I wonder if it has all the rubicon components.

 

Maybe they just think it looks cool maybe they swapped in the rubi 44?

 

The liberty light bar don't look too bad on there mine looks better lol!

 

Got a picture of it?

And where's your pictures for the calendar! lol

 

My roof rack and light bar are finished they just need paint can't do it till the weekend. And the parts supplier sent me a water pump for an 84 Cherokee lol I have a 99.. No one checked and when I got there at 9:30 pm I found out t was the wrong part... So tomorrow night I'm doing it instead

 

If you look at my avatar pic that's my roof rack with out the light bar attached to it. Had it up there for a couple days.