Kill switch

Reply Subscribe

Thread Tools

Search this Thread

Aug 29, 2012 | 12:02 AM

#16

Radi

CF Veteran

Joined: Apr 2012

Posts: 5,302

Likes: 23

From: Wisconsin

Model: Cherokee

Quote:

Originally Posted by Shootin_tex

How does one deactivate the ***** buzzer anyway?

You remove the ***** from the ***** then unplug the *****. Pretty **** simple!

Just messin' with ya. Can't tell which buzzer you are asking about since the name isn't clear.

Aug 29, 2012 | 12:28 AM

#17

taxidave

Member

Joined: Jun 2010

Posts: 111

Likes: 1

From: Walnut Creek, CA

Year: 1991

Model: Cherokee

Engine: 4.0 liter

Quote:

Originally Posted by Shootin_tex

What is the best way to wire up a kill switch? (30 amps) to kill power since it won't stop running. I was thinking fuel pump unless anyone has a better idea. 1987 jeep 4.0

Have you checked the linkage that goes from the key cylinder to the ignition switch? IE when you turn the key off, does the ignition switch go to the off position?
I hooked one up on the power wire to the ignition switch until I got a new steering column.
But!!! You run the chance of draining your battery if you hook it up wrong. Engine stops, but all the other power keeps running.

Last edited by taxidave; Aug 29, 2012 at 12:31 AM.

Aug 29, 2012 | 12:38 AM

#18

taxidave

Member

Joined: Jun 2010

Posts: 111

Likes: 1

From: Walnut Creek, CA

Year: 1991

Model: Cherokee

Engine: 4.0 liter

You could go all out and install switches on all your wires going to the ignition and run them up to your overhead console (if you have one). That way you could feel like a pilot

hitting all your switches before you start your Jeep. Then when you stop you hit them all off.