just installed 3inch liftt and got some wobble
#1
Member
Thread Starter
Join Date: Dec 2009
Location: Wilimington
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
just installed 3inch liftt and got some wobble
I just put my lift on and i got some wobble, so I figured I would do a alignment so I called a couple of places and most said they would not do it. I called Sears and the guy told me I would be wasting my money, saying that it would not solve my problems because that would not cause shaking. That it had to be my tires that where not balanced, but those where balanced about a week ago..So I'm asking for suggestions any would be great.. Thanks
#2
Move to a state that is more 'Lift' friendly, that would the shop issue.
As for the wobble; You trac bar may be loose and/or the steering parts. Put the front axle up on jack stands and ave someone turn the wheel from left to right. Look for anything moving before or after it should.
You can do a driveway alignment by measuring the distance from left to right tire on the front side and then on the back side. If anything you want the tires to point inward rather then out (toe in vs. toe out). Adjust as needed. Hope this helps.
As for the wobble; You trac bar may be loose and/or the steering parts. Put the front axle up on jack stands and ave someone turn the wheel from left to right. Look for anything moving before or after it should.
You can do a driveway alignment by measuring the distance from left to right tire on the front side and then on the back side. If anything you want the tires to point inward rather then out (toe in vs. toe out). Adjust as needed. Hope this helps.
#3
Member
Thread Starter
Join Date: Dec 2009
Location: Wilimington
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Move to a state that is more 'Lift' friendly, that would the shop issue.
As for the wobble; You trac bar may be loose and/or the steering parts. Put the front axle up on jack stands and ave someone turn the wheel from left to right. Look for anything moving before or after it should.
You can do a driveway alignment by measuring the distance from left to right tire on the front side and then on the back side. If anything you want the tires to point inward rather then out (toe in vs. toe out). Adjust as needed. Hope this helps.
As for the wobble; You trac bar may be loose and/or the steering parts. Put the front axle up on jack stands and ave someone turn the wheel from left to right. Look for anything moving before or after it should.
You can do a driveway alignment by measuring the distance from left to right tire on the front side and then on the back side. If anything you want the tires to point inward rather then out (toe in vs. toe out). Adjust as needed. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2016 08:10 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
09-07-2015 06:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)