Hey everyone i was looking into getting adjustable coil over spacers because of heavy a$$ bumper and winch and was looking at the instructions and saw i either have a weld in type or bolt in(Which im hoping i have) and was wondering if there is any way to tell with out tearing it apart.Like if only sports had bolt in..etc.And by the way i have an 01 cherokee sport.Thanks

 

ya i just did a set of them a few months ago on my 2000. I had weld in bump stops. If you look at you bumpstop there will be a weld about 2 inchs up from the rubber bump stop its self if you have welded ones. I haven't seen any bolt in ones but i am sure they would be in the same area. It was a easy thing to do even with the weld ins. PM me if ya need some help.

 

I have a set on mine but not sure if they make a differents or not. I have never ran without then to tell the difference.

 

OK thanks for the offer 00XJinPA Im probably goin to be needing some help with this because I have a feeling its gonna be like everything else I put on on this jeep, a pain in the a$$ to put in.

 

No you will be fine. JKS sends you pretty easy instructions on it to. The hardest part is takin everything apart and putin it back together.

 

I'm putting a set tomorrow. The reason I'm adding them to level out my ride as the passenger side sags a little. I don't know if the weight is more on the right side, but I've also added home fabricated bumpers, winch and a 33" on a tire carrier.