Jeep won't start no spark
#1
Newbie
Thread Starter
Join Date: May 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Jeep won't start no spark
Overnight my 2000 Cherokee sport 4.0 went from running and starting ok to not starting. Engine is getting gas but has no spark to kick over and start. Changed the can shaft sensor still won't start is it possible that the coil pack could go bad all at once over night? Is there any other reasons for not starting
#2
CF Veteran
Join Date: Nov 2010
Location: In the middle of Minnesota!
Posts: 5,805
Received 99 Likes
on
88 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Did you replace the CAMSHAFT POSITION SENSOR or the CRANKSHAFT POSITION SENSOR?
Both can be responsible for no-starts. Both can be tested with a meter and a manual. If either are replaced, the replacement should be a genuine MOPAR sensor from Jeep.
Both can be responsible for no-starts. Both can be tested with a meter and a manual. If either are replaced, the replacement should be a genuine MOPAR sensor from Jeep.